OKS 670 – High-Performance Lube Oil, with white solid lubricants

High-performance lube oil with good penetration properties, for long-term lubrication of machine elements subjected to high pressures, dust or moisture.

Find a dealer

Areas of application

  • Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides
  • Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc.
  • Chains in a dusty environment

Advantages and benefits

  • Light-coloured
  • High lubrication effect due to optimum product formula
  • Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points
  • Good lubricating and pressure absorption capacity
  • Excellent corrosion protection
  • Good wear protection, also in comparison to higher-viscosity oils without solid lubricants
  • Broad range of uses in all maintenance sectors
  • Also available as spray version OKS 671

Technical specifications

  • lower operating temperature: -30 °C
  • upper operating temperature: 60 °C / 150 °C (with solvent / after evaporation of the solvent)
  • density (at 20°C): 0.82 g/cm³
  • viscosity at (40°C): 18 mm²/s (with solvent)
  • coefficient of friction SRV (μ): 0.08 (ball, disk)
  • salt spray test: > 150 h


For highest effectiveness, clean the lubrication point. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir or shake well before use. Apply sufficient OKS 670 with a brush, drip oiler, oil can or by immersion. Spray OKS 671 on evenly. Remove any excess. Only mix with suitable lubricants.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product