Dealer locator
load google maps

OKS 468 – Plastic and elastomer adhesive lubricant

Silicone-free lubricant and sealing lubricant for plastic/plastic and plastic/metal combinations.

Areas of application

  • Silicone-free alternative for the lubrication of O-rings and sealings during assembly.
  • Lubrication of plastic parts such as gears, sliding surfaces, etc.

Advantages and benefits

  • Excellent adhesion on plastics and metals
  • Tasteless and odourless
  • Consistent properties without drying out, hardening or bleeding
  • NSF H1 registered
  • Compatible with plastics (see table)
  • MOSH/MOAH-free
  • Silicone-free

Technical specifications

  • Operating temperature: -25 °C → +150 °C
  • Base oil viscosity (40 °C): 1,700 mm²/s


Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. Observe the machine manufacturer's instructions. Due to the high number of polymers and elastomers used we highly recommend that you always carry out tests beforehand at critical applications. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Arrange a callback

    For more information on the processing of your data through the contact form, please see our privacy policy.

  • Buy product

    Buy product