OKS 4240 – Special Grease for Ejector Pins
OKS 4240 is a special grease for the lubrication of ejector pins in the plastics industry.
Find a dealer
Areas of application
- Lubrication of ejector pins in the plastics industry at high temperatures and slow movements
- Lubrication of rolling and friction bearings at extremely high temperatures and aggressive operating conditions
Advantages and benefits
- Extraordinarily good resistance to vapours occurring during plastic processing
- Good plastic and elastomer compatibility
- Excellent temperature resistance
- Lowest evaporation losses, also at high temperatures ensure long regreasing intervals
- Good media resistance
- Also suitable for fast-runing bearings thanks to low share of solid lubricants
Technical specifications
- lower operating temperature: -20 °C
- upper operating temperature: 300 °C
- consistency: 2 NLGI grade (DIN ISO 2137)
- viscosity (at 40°C): 440 mm²/s (base oil)
- four-ball test rig welding load: 4,800 N
- UFI: 3HQ8-50KC-Y006-ENUT
Applications
Clean the lubricating points well for optimal effect. Subsequently blow out with dry compressed air. Before greasing for first time, remove anti-corrosion agent. Apply grease evenly to functional surfaces. Fill bearings running slowly completely, fill high-speed bearings (DN value > 100,000) only up to about 2/3 of the free space inside the bearing. The bearing and machine manufacturer's instructions should be observed. Relubrication at temperatures under 200°C not required. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants.
Industries
No matter what industry you come from, we at OKS have the right solution for you.
-
Customer and Technical Service
- +49 8142 3051-637
- cts@oks-germany.com
-
Buy product
