OKS 400 – MoS2 Multipurpose High-Performance Grease

OKS 400 is a multipurpose high-performance grease with MoS₂ for universal use.

Find a dealer

Areas of application

  • Lubrication of parts subject to high levels of stress such as plain, roller and rod-end bearings, spindles and guideways

Advantages and benefits

  • Highly suitable for high-stressed lubrication points
  • Highly effective caused by optimal combination of components
  • Saving of maintenance and lubrication costs by reducing downtimes and corrective maintenance
  • Reduction of down times due to wear

Technical specifications

  • lower operating temperature: -30 °C (≤ 1,400 hPa)
  • upper operating temperature: 120 °C (F50 (A/1500/6000), 100h)
  • consistency: 2 NLGI grade (DIN ISO 2137)
  • viscosity at (40°C): 100 mm²/s (base oil)
  • four-ball test rig welding load: 3,600 N


For highest effectiveness, carefully clean the lubrication point, for example with OKS 2610 or OKS 2611 universal cleaner. Before filling for first time, remove anticorrosion agent. Fill bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50 000) and their housings should be filled completely. The bearing and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on basis of service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid overlubricating the bearing. If lubrication frequencies tend to be low, you should aim for a full grease change. Only mix with suitable lubricants.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product