OKS 3725 – Gear Oil, ISO VG 320
Fully synthetic oil of the ISO VG class 320 for lubricating gears and other machine elements in the food processing technology.
Find a dealer
Areas of application
- Lubrication of closed toothed gearing
- Liquid lubrication of chains, joints, guides, rolling and friction bearings
- Suitable for immersion-bath, immersion-bath circulation and injection lubrication
Advantages and benefits
- NSF H1 registered
- Good ageing and oxidation stability through optimal additives
- Cold and hot water resistant
- Resistant to water steam, disinfectants and cleaning agents
- Wide operating temperature range
- Shear-stable and low-foaming
- Good wear protection
- Good corrosion protection
- Long economic operating times
- MOSH/MOAH-free (as per recipe)
Technical specifications
- lower operating temperature: -30 °C
- upper operating temperature: 120 °C
- density (at 20°C): 0.86 g/cm³
- viscosity (at 40°C): 320 mm²/s
- FZG wear protection test: > 12 power level (A/8,3/90)
Applications
Clean the lubricating point thoroughly for optimal effect. Before filling gears for first time, remove anti-corrosion agent. Fill the gears so that the immersing teeth transport the lubricant reliably. Apply a sufficient amount of lubricant with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Observe the gear and machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants.
Industries
No matter what industry you come from, we at OKS have the right solution for you.
-
Customer and Technical Service
- +49 8142 3051-637
- cts@oks-germany.com
-
Buy product
