OKS 3720 – Gear Oil, ISO VG 220

Fully synthetic oil of the ISO VG class 220 for lubricating gears and other machine elements in the food processing technology.

Find a dealer

Areas of application

  • Lubrication of closed toothed gearin
  • Liquid lubrication of chains, joints, guides, rolling and friction bearings
  • Suitable for immersion-bath, immersion-bath circulation and injection lubrication

Advantages and benefits

  • NSF H1-registered
  • Good ageing and oxidation stability through optimal additives
  • Cold and hot water resistant
  • Resistant to water steam, disinfectants and cleaning agents
  • Wide operating temperature range
  • Shear-stable and low-foaming
  • Good wear protection
  • Good corrosion protection
  • Long economic operating times
  • MOSH/MOAH-free (as per recipe)

Technical specifications

  • lower operating temperature: -30 °C
  • upper operating temperature: 120 °C
  • density (at 20°C): 0.86 g/cm³
  • viscosity at (40°C): 220 mm²/s
  • FZG wear protection test: > 12 power level (A/8,3/90)


Clean the lubricating point thoroughly for optimal effect. Before filling gears for first time, remove anti-corrosion agent. Fill the gears so that the immersing teeth transport the lubricant reliably. Apply a sufficient amount of lubricant with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Observe the gear and machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product