OKS 354 – High-Temperature Adhesive Lubricant, synthetic

Non-soiling liquid lubricant for lubrication of machine elements at high temperatures or strong influence of water.

Find a dealer

Areas of application

  • Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations

Advantages and benefits

  • Outstanding oxidation properties
  • Resistant to water and steam
  • Good creep properties
  • Outstanding adhesion and lubrication effect with no tendency to drip
  • No formation of hard residues
  • Extreme wear protection through Moₓ-Active
  • Resistant to ultraviolet radiation
  • Also available as spray version OKS 3541

Technical specifications

  • lower operating temperature: -10 °C
  • upper operating temperature: 250 °C
  • density (at 20°C): 0.92 g/cm³
  • viscosity at (40°C): 4,100 mm²/s
  • four-ball test rig welding load: 2,200 N


For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir/shake well before use. Apply OKS 354 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions, avoid excessive lubrication. Only mix with suitable lubricants.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product