OKS 277 – High-Pressure Lubrication Paste, with PTFE

High-pressure lubrication paste with PTFE for the lubrication of sliding machine elements made of metal, plastic and ceramic.

Find a dealer

Areas of application

  • Lubricating and sealing off tap cocks, labyrinth seals, stuffing boxes and packings
  • Lubricating and sealing off fittings made of metal, plastic and ceramic, e.g. drain, cold- and hot-water fittings
  • Long-term lubrication of heavily loaded press and guide plates, for example on telescope booms of mobile cranes
  • As a lubricant for of threaded spindles on radiator thermostats

Advantages and benefits

  • Reduces wear
  • Extension of the relubrication intervals
  • High resistance to oxidation
  • Noise and vibration-damping
  • Resistant to cold and hot water, water vapour, lactic, formic, acetic and fruit acid, as well as alkaline and acidic cleaning agents and disinfectants
  • Good elastomer and plastic compatibility

Technical specifications

  • lower operating temperature: -20 °C
  • upper operating temperature: 150 °C
  • four-ball test rig welding load: 2,200 N


For optimum adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly with a brush, spatula, etc. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product