OKS 265 – Chuck Jaw Paste

Fully-synthetic chuck jaw paste for lubricating friction and sliding points under high and impact-loaded loads.

Find a dealer

Areas of application

Long-term lubrication of dirt-sensitive sliding points under vibration stresses
Particularly suitable for lubricating chucks on tool machines
Broad range of uses at stress-loaded parts, also at contact with cooling lubricants
Lubrication of control and drive mechanisms
Can be used at filling, labelling and packaging machines

Advantages and benefits

Resistant to water, steam and aqueous cooling lubricants
Prevents frictional corrosion reliably
Highly effective due to optimum solid lubricant combination
Minimal consumption due to formation of highly effective lubricating films

Technical specifications

lower operating temperature: -45 °C
upper operating temperature: 110 °C
four-ball test rig welding load: 4,200 N
Total friction coefficient (μ): 0.1 (screw ISO 4017 M10x55-8.8 black-oxide, nut ISO 4032 M10-10 black-oxide)
UFI: 7YKC-J0T1-300V-PD21

Applications

For optimum adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly to the functional surfaces with a brush, spatula, etc. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.