OKS 265 – Chuck Jaw Paste
Fully-synthetic chuck jaw paste for lubricating friction and sliding points under high and impact-loaded loads.
Find a dealer
Areas of application
- Long-term lubrication of dirt-sensitive sliding points under vibration stresses
- Particularly suitable for lubricating chucks on tool machines
- Broad range of uses at stress-loaded parts, also at contact with cooling lubricants
- Lubrication of control and drive mechanisms
- Can be used at filling, labelling and packaging machines
Advantages and benefits
- Resistant to water, steam and aqueous cooling lubricants
- Prevents frictional corrosion reliably
- Highly effective due to optimum solid lubricant combination
- Minimal consumption due to formation of highly effective lubricating films
Technical specifications
- lower operating temperature: -45 °C
- upper operating temperature: 110 °C
- four-ball test rig welding load: 4,200 N
- thread friction coefficient (μ total): 0.1 (screw ISO 4017 M10x55-8.8 black-oxide, nut ISO 4032 M10-10 black-oxide)
Applications
For optimum adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly to the functional surfaces with a brush, spatula, etc. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.
Industries
No matter what industry you come from, we at OKS have the right solution for you.
-
Customer and Technical Service
- +49 8142 3051-637
- cts@oks-germany.com
-
Buy product
