OKS 2100 – Protective Film for Metals

Dry and clean protective film fast to handling on a wax basis for metals that can be removed easily and protects against corrosion reliably up to two years.

Find a dealer

Areas of application

  • Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (tropics, ocean, industrial atmosphere)
  • Ideal on-call and storage protection for spare parts with possibility of direction installation

Advantages and benefits

  • Highly effective due to good film-forming properties
  • Outstanding corrosion and oxidation protection
  • No degreasing prior to commissioning required, as compatible with all lubricants
  • Waterproof and resistant to weathering
  • Suitable for all climate zones
  • No surface discolouration
  • NSF H2 registered (only OKS 2100)
  • Also available as spray version OKS 2101

Technical specifications

  • lower operating temperature: -40 °C
  • upper operating temperature: 70 °C
  • salt spray test: > 1,000 h (layer thickness 50 µm)
  • optimal layer thickness: 50 µm (DIN 50 982-2)


For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. The surfaces must be bright metal and dry. Stir OKS 2100 thoroughly before use. Apply in an evenly thin film to the prepared surfaces, preferably by spraying or dipping, in individual cases also by brush. Shake OKS 2101 well and spray on evenly. Avoid local excesses. Drying times as specified in the following technical data.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product