OKS 1301 – Sliding Film for Plastics and Metals, Wax-based, Spray

OKS 1301 is suited for producing non-slip dry, non-soiling sliding films on a wide range of materials.

Find a dealer

OKS 1301 - Sliding Film for Plastics and Metals, Wax-based, Spray

Areas of application

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics
As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques
As dry lubricant for maintenance and care of plastic/metal sliding pairs
For assembly of axial face seals or dry lubrication in textile or paper-processing machines

Advantages and benefits

Highly effective due to outstanding film-forming properties
Broad range of uses for dry lubrication in maintenance and care
Waterproof and resistant to weathering

Technical specifications

lower operating temperature: -60 °C
upper operating temperature: 100 °C
Total friction coefficient (μ): 0.08-0.1 (screw ISO 4017 M10x55-8.8 black-oxide, nut ISO 4032 M10-10 black-oxide)
UFI: J8UF-Q0YP-U00W-93PD

Applications

For optimum adhesion clean surfaces, first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. The surfaces must be metallic bright and dry. Shake well before use. Spray a thin layer evenly from 20 - 30 cm distance to the prepared surface. Drying conditions acc. to the following technical data.