OKS 1110 – Multi-Silicone Grease

Highly adhesive transparent silicone grease for fittings, seals and plastic parts.

Find a dealer

Areas of application

  • Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators
  • Lubrication of O-rings and rubber seals for assembly and during operation
  • Lubrication of plastic parts

Advantages and benefits

  • NSF H1 registered
  • Tasteless and odourless
  • Highly effective due to excellent adhesion on all materials
  • Neutral behaviour with regard to plastics and elastomers
  • Completely EPDM-compatible
  • High long-term stability without drying out, hardening or bleeding
  • Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
  • MOSH/MOAH-free (as per recipe)

Technical specifications

  • lower operating temperature: -40 °C
  • upper operating temperature: 200 °C
  • consistency: 3 NLGI grade (DIN ISO 2137)
  • viscosity at (40°C): 9,500 mm²/s (base oil)


Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product