OKS 1035/1 – Silicone Oil, 350 cSt

OKS 1035/1 is a silicone oil, highly suited as lubricant and parting agent for plastics and elastomers.

Find a dealer

Areas of application

  • Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer
  • Avoids the sticking of e.g. adhesives and sealing excess or water wetting
  • Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other
  • Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines
  • For easy retracting of plastic and rubber profiles, e.g. in the door and window production

Advantages and benefits

  • High efficiency because of excellent netting of the surface and building of extremely thin lubricating films
  • Separating effect with antistatic properties
  • Manifold applications for permanent lubrication, protection, maintaining and impregnation
  • Neutral behaviour against plastic and elastomers
  • Resistant against water and atmospheric influences
  • NSF H1-registered
  • MOSH/MOAH-free (as per recipe)

Technical specifications

  • lower operating temperature: -55 °C
  • upper operating temperature: 200 °C
  • density (at 20°C): 0.97 g/cm³
  • viscosity at (25°C): 350 mm²/s


For best results clean the surfaces first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. Apply the product with a brush, drip oiler or by dipping evenly thin. Avoid excess. Mix with appropriate lubricants only. Silicone based plastics, e.g. silicone rubber could be affected through the silicone oil. At sliding areas with pure oxygen the application of silicone oil is not allowed. Turbidity cannot be excluded. Turbidity does not have any influence on the quality of the product.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

  • Buy product

    Buy product