OKS 1020/2 – Silicone Oil, 2000 cSt

OKS 1020/2 is a silicone oil, highly suited as lubricant and parting agent for plastics and elastomers.

Areas of application

  • Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer
  • Avoids the sticking of e.g. adhesives and sealing excess or water wetting
  • Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other
  • Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines
  • For easy retracting of plastic and rubber profiles, e.g. in the door and window production

Advantages and benefits

  • High efficiency because of excellent netting of the surface and building of extremely thin lubricating films
  • Separating effect with antistatic properties
  • Manifold applications for permanent lubrication, protection, maintaining and impregnation
  • Neutral behaviour against plastic and elastomers
  • Resistant against water and atmospheric influences

Technical specifications

  • lower operating temperature: -50 °C
  • upper operating temperature: 200 °C
  • density (at 20°C): 0.96 - 0.97 g/cm³
  • viscosity at (25°C): 2,000 mm²/s


For best results clean the surfaces first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. Apply the product with a brush, drip oiler or by dipping evenly thin. Avoid excess. Mix with appropriate lubricants only. Silicone based plastics, e.g. silicone rubber could be affected through the silicone oil. At sliding areas with pure oxygen the application of silicone oil is not allowed.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Arrange a callback

    For more information on the processing of your data through the contact form, please see our privacy policy.

  • Buy product

    Buy product