Search
Print
Dealer locator
load google maps

OKS 530 – MoS₂ Bonded Coating, water-based, air-drying

OKS 530 is a MoS₂ bonded coating for lubrication of heavily loaded chains when oil and grease lubrication is no longer possible.

Areas of application

  • Dry lubrication with solid lubricants as longer-acting reserve layers in area of low sliding speeds subject to high surface pressures and pre-determined sliding paths
  • Wear protection for increased service life of sliding surfaces
  • Fully effective even after longer standstills
  • Resistant to high temperatures, no adhesion of dust and dirt

Advantages and benefits

  • Highly effective due to good adhesion to prepared substrates
  • Consistent coefficient of sliding friction under maximum loading of sliding film
  • Wear protection of sliding points that can otherwise not be lubricated is possible
  • Firmly adhering, pressure and temperature-resistant dry lubricating film

Technical specifications

  • Operating temperature: -35 °C → +450 °C
  • Press-fit: µ = 0.10, no chatter
  • Thread friction (M10/8,8): µ total = 0.05

Applications

For optimum adhesion clean surfaces, first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. The surfaces must be metallic bright and dry. Chemical or mechanical preparation of the surfaces might considerably improve the service life of the bonded coating. Stir well prior to use. The application preferably is effected by spraying or dipping, in single cases also by brushing a uniform thin film on to the prepared surfaces. Local excess should be avoided. Drying and curing conditions acc. to the following technical data.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 (0) 8142 3051 - 637
  • Arrange a callback

  • Buy product

    Buy product