Search

OKS 2581 – Stainless Steel Protection, Spray

Corrosion protection for ferrous metals and coating for other materials based on stainless steel pigments with active cathodic corrosion protection.

Find a dealer
New product! Replaces OKS 2541
OKS 2581 - Stainless Steel Protection, Spray

Areas of application

  • For touching up damaged spots on stainless steels, such as weld seams.
  • Coating on pipelines and ducts in all types of HVAC systems
  • Finish coat for zinc dust paints such as OKS 2551
  • Coating of non-metallic materials to create a stainless steel appearance

Advantages and benefits

  • Enduring corrosion protection with active cathodic corrosion protection
  • Contains pure stainless steel polish for a high-quality stainless steel surface appearance
  • Self-healing polymer layer which closes again after slight damage and prevents corrosion
  • Suitable for corrosion protection up to Category C4H as per EN ISO 12944:2018-06 for areas with an industrial atmosphere and coastal areas with moderate salt levels
  • Finish coat, e.g. for a prime coat with OKS 2551
  • Universal protective and decorative coating for many materials

Technical specifications

  • lower operating temperature: -70 °C
  • upper operating temperature: 250 °C
  • salt spray test: >1,300 h / >1,700 h (layer thickness >70 µm air-drying / layer thickness >100 µm heat-curing (150°C/min))
  • optimal layer thickness: 60-80 µm (DIN 50 982-2)
  • UFI: 8GPA-H0N7-E00K-21KM

Applications

Clean the surfaces for optimum adhesion. It is best to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. The surface to be treated must be dry, uncoated and free of grease. Shake the can before use until you can hear the stirring balls rattle and continue shaking vigorously for 2 more minutes. Spray evenly onto the prepared surface from a distance of 20 - 30 cm using 1 - 2 cross coats or circular movements. Avoid local excesses. For thicker layers, apply another coat after the solvent has evaporated. After spraying, turn the can upside down and spray the valve in this position until only solvent comes out. Drying and curing times as per following technical data.

  • Customer and Technical Service

    Customer and Technical Service

    • +49 8142 3051-637
  • Contact us

    Customer and Technical Service

    Contact
  • Buy product

    Buy product